Tags

, ,

Some people are naturals, however, for most people it takes practice and dedication before you’re considered to be a good shot. Sometimes things such as error in setup or execution causes shooting to be off, while other times, it is simply getting used to a new firearm. Rifle shooting involves skill, but generally, accuracy is about consistency and eliminating external influences that constrain the gun’s capabilities. So here are some tips for shooting at your best…

The first tips are more for safety than they are for accuracy, but these are important things to know. First of all, always treat a firearm as if it were loaded, even if you’re sure that the gun is unloaded. Second, always, no matter what, keep the firearm pointed in a safe direction; keep your trigger finger off the trigger and outside the trigger guard until you have made a cognizant decision to shoot; and always be sure of your target, backstop, and beyond- basically, know what is in your line of fire. Target shooting at a professional rifle range should be fine, but anywhere else you need to make sure that you aren’t putting anyone in danger.

Now, here is the good stuff:Uncle_Buds_Bulls_Bag_06

  • Always make sure that your scope is properly mounted. To do this, you should have quality bases and rings; level the gun in a vise and level the scope before securing it. There are excellent tutorials on YouTube, and make sure that you follow the manufacturer’s specification.
  • Make sure that your gun rest is stable, (yes this sounds like a no-brainer, but you would be surprised how often this effects people’s shooting).
  • Different people need a different amount of shoulder pressure. Heavy pressure is usually more difficult to repeat from shot to shot, and you really should try to uniform shoulder pressure, so if you prefer heavy pressure you need to make the pressure the same every single time.
  • You want your trigger pull to be consistent, and remember that a proper trigger pull is not actually a pull. It should be more of a trigger press, try to press the trigger, pressing it straight to the rear without disturbing the sight picture. This will take practice.
  • Be patient enough to wait for your barrel to cool, if your barrel overheats this can be problematic.

Always follow through. Remember that the shot doesn’t “end” until after impact, do your best to try to visualize each bullet impacting your target. Stay connected to the trigger until it breaks. And remember

Advertisements